Kramer KIT-400

Kramer Electronics Ltd.
KIT-400 – Operating and Controlling KIT-400
24
Defining Power-up State
KIT-400R enables defining which input is selected when the device is powered up.
To define the power up state:
1. On the front panel press MENU. The menu appears.
2. Select ADVANCED.
3. Click POWER UP STATE.
4. Press ENTER and define the selected input:
Menu Item
Function
Select HDMI
KIT-400R’s HDMI input is selected when the unit is powered up.
Select HDBT
KIT-400R’s HDBT input is selected when the unit is powered up.
Last Selected
When powered up, KIT-400R switches to the input which was
selected before being powered down.
Power-up state mode is defined.
Viewing Device Information
Device information includes the selected source, the input and output resolutions, and the
software version.
To view the information:
1. On the front panel press MENU. The menu appears.
2. Click INFORMATION and view the input source selection and its resolution, the output
resolution and the software version.
Performing a Reset
KIT-400R enables performing factory reset via the front panel MENU buttons.
To reset the device:
1. On the front panel press MENU. The menu appears.
2. Click Factory and select RESET ALL.
Wait for completion of factory reset (resolution is set to Native).
Device is reset.