Modifying a Frame
The default device control panel includes several frames (for example, the Video Frame) that
can be modified via the Edit Panel tab.
To modify a frame:
1. In the Navigation pane, click Automation. The Automation page appears (see
Figure 29).
2. Click the Panel tab. The KIT-400 Device Control Panel appears (see Figure 31).
3. Click EDIT. Edit Panel window appears (see Figure 32).
4. Click the relevant frame (in this example, Video Frame appears in the Object List).
Video frame is selected in the control panel.
Figure 37: Edit Panel – Video Frame Selected
The Properties (Frame) and Video Frame Object list appear:
Figure 38: Edit Panel – Properties (Button) Area
5. Click next to Video Frame to remove the frame from the panel.
To Next Page
Loading...
