Built-in noise reduction and picture enhancement features
Powerful audio features via DSP technology including audio equalization,
mixing, delay and so on
One stereo speaker output, 10W per channel into 8Ω, on a 4-pin terminal
block connector
Built-in Time Base Corrector - stabilizes video sources with unstable sync
Built-in video Proc-Amp - color, hue, sharpness, contrast, and brightness are
set individually for each input
BLANK and FREEZE buttons, a RESET TO XGA/720P button (to hardware-
reset the output resolution); and a PANEL LOCK button
Firmware Upgrade – Ethernet-based, via a user-friendly software upgrade
tool
User-friendly AP for Text Overlay support
An OSD (On-Screen Display) – for making adjustments – that can be located
anywhere on the screen
In addition, the VP-734:
Includes non-volatile memory that retains the last settings, after switching the
power off and then on again
Is specifically designed to improve video quality by reducing chroma noise
Includes numerous filters and algorithms for eliminating picture artifacts
Scales and zooms (to up to 400% of the original size)
Features advanced EDID management per input
Control your VP-734 directly via the front panel push buttons (with on-screen
menus), or:
By RS-232 serial commands transmitted by a touch screen system, PC, or
other serial controller
Remotely, from the infrared remote control transmitter
Via the Ethernet using built-in user-friendly Web pages
To Next Page
Loading...
