Kramer VP-734

VP-734 - Configuring the VP-734 via the OSD MENU Screens
25
7.4 The Audio Screen
Figure 16: Audio Screen
Setting
Function
Default
Input Volume
Adjust the input volume: -22 to 22
0
Output Volume
Adjust the output volume: -100 to 24
0
Bass
Adjust the bass: -24 to 24
0
Treble
Adjust the treble: -24 to 24
0
Balance
Adjust the balance: -10 to 10
0
Loudness
Set loudness Off or On
Off
Delay
Select to dynamic (the audio delay equals the pipeline video
delay), User Define or Off
Dynamic
Input Source
Select the audio input: Analog 1 to Analog 7, S/PDIF or
Embedded (for HDMI and DP inputs).
For each video input you can assign an analog audio source,
the digital audio source or embedded this input will be switched
along with the video input.
For example, if Analog 1 is assigned to UNIV 2, then whenever
UNIV 2 is selected, Analog 1 will be selected too
Analog 1
Audio-Follow-
Video
Set to Off or On. When on, the audio will follow the video, as set
in the Input Source menu. When Off selecting a different video
signal will not change the audio setting and it can be selected
via the Input Source menu separately
On