Contents
1 Introduction 1
2 Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 2
2.3 Recycling Kramer Products 3
3 Overview 4
3.1 Defining the VP-734 Presentation Switcher/ Scaler 6
4 Installing in a Rack 9
5 Connecting the VP-734 10
5.1 Universal Connector Pinout 13
5.2 Connecting to the VP-734 via RS-232 13
5.3 Connecting the Balanced/Unbalanced Stereo Audio Output 14
5.4 Connecting the VP-734 via the ETHERNET Port 14
6 Presentation Switcher / Scaler Buttons 18
6.1 Switching the Inputs 18
6.2 Using the BLANK and FREEZE Buttons 18
6.3 Locking and Unlocking the Front Panel 18
6.4 The Infrared Remote Control Transmitter 19
7 Configuring the VP-734 via the OSD MENU Screens 20
7.1 The Input Screen 21
7.2 The Picture Screen 22
7.3 The Output Screen 23
7.4 The Audio Screen 25
7.5 The Setup Screen 26
7.6 The Info Screen 35
8 Firmware Upgrade 36
9 Using the Embedded Web Pages 37
9.1 Browsing the VP-734 Web Pages 37
9.2 The Routing & Scaling Page 39
9.3 The Device Settings Page 44
9.4 The Input Settings Page 46
9.5 The Output Settings Page 48
9.6 The Audio Settings Page 49
9.7 The Miscellaneous Video Settings Page 50
9.8 The EDID Management Page 51
9.9 The Advanced Settings Page 54
9.10 The Custom Resolutions Page 55
9.11 The Security Page 55
9.12 The About Page 56
10 Technical Specifications 57
10.1 Default Communication Parameters 58
10.2 Tables of Supported Input Resolutions 58
10.3 Tables of Supported Output Resolutions 61
11 VP-734 Communication Protocol 63
11.1 Command list 64
To Next Page
Loading...
