Kramer VP-734

46
VP-734 - Using the Embedded Web Pages
9.4 The Input Settings Page
The Input Settings page lets you setup the inputs and can also be accessed via the
edit icon in the Scaling & Routing page, see Section 9.2.4.
Figure 35: The Input Settings Page
The following table defines the Input Settings page items:
Button
Function
Source
Select the input source, see Section 7.1
Label
Label the input
Priority
Set the priority for auto-switching of the selected input
Source type (UNIV)
Set the type of the analog video source
(VGA/Component/YC/Video), disabled if the selected input is
not UNIV, see Section 7.1
HDCP (HDMI &
DisplayPort)
Set to ON or OFF