Kramer VP-734

VP-734 – Overview
7
Figure 1: VP-734 Presentation Switcher/ Scaler Front Panel
#
Feature
Function
1
IR Receiver
Receives signals from the remote control transmitter
LED
Lights red when the unit accepts IR remote commands
2
INPUT Selector
Buttons
(illuminate green
when selected)
UNIV.
1
Press to select the composite video / s-Video / component video source (configured via the OSD menu, see Section 7.1)
and the appropriate audio source (from 1 to 2)
3
HDMI
1
Press to select the HDMI source (from 1 to 4)
4
DP
Press to select the DP source
5
Program BLANK Button
Press to toggle between a blank screen (blue or black) and the program display.
The BLANK button can be programmed to mute the audio signal at the same time (see Section 6.2)
6
Program FREEZE Button
Press to freeze/unfreeze the program output video image, The FREEZE button can be programmed to mute the audio
signal at the same time (see Section 6.2)
7
MENU Button
Press to display the OSD menu screen. Press again to return to normal operation.
8
ENTER Button
Press to move to the next level in the OSD screen or to accept a new parameter
Button
Decreases the range by one step in the OSD screen or moves to the previous level in the OSD screen.
Decreases the volume level, when not in the OSD menu
Button
Moves up one step (in the same level) in the OSD screen, or moves to the previous slide when running a slideshow
Button
Increases the range by one step in the OSD screen
Increases the volume level, when not in the OSD menu
Button
Moves down one step (in the same level) in the OSD screen, or moves to the next slide when running a slideshow
9
RESET TO XGA/720p
Button
Press and hold to reset to the default resolution (toggles between RESET TO XGA and 720p)
10
PANEL LOCK Button
Press to lock/unlock the front panel to prevent unintentional operation
11
USB Connector
Connects to a USB drive to download a Logo and save settings (see Section 6.2)