VP-734 - Using the Embedded Web Pages
9.5 The Output Settings Page
Figure 36 shows the Output Settings page.
Figure 36: The Output Settings Page
Define the output resolution
Set the aspect ratio (see Section 7.3.1)
Set the zoom from 100% to 400% or click custom to set the custom
zoom and enable Zoom Horizontal Pan and Zoom Vertical Pan
Enabled when selecting custom aspect ratio
Select On or Off; set to On to stretch the outputted picture
Select Follow Input or Follow Output to define whether the HDCP will
follow the input or the output
Set the HDMI1 output type to Auto, HDMI or DVI
Set the test pattern to Colorbar, SMPTE, Greyscale, Picture Border,
Multiburst, Ramps, H-pattern, Setup, or set to Off
Set the output audio level
To Next Page
Loading...
