6 Presentation Switcher / Scaler Buttons
The VP-734 includes the following front panel buttons:
Seven INPUT selector buttons
BLANK and FREEZE buttons
Menu navigation buttons (see Section 7)
A RESET TO XGA/720p button
A PANEL LOCK button
6.1 Switching the Inputs
You can switch an input to the outputs by pressing the relevant INPUT front panel
button.
6.2 Using the BLANK and FREEZE Buttons
Use the OSD menu (see Section 7.5.3) or the Web pages (see Section 9.9) to
determine the behavior of the BLANK and FREEZE buttons.
6.3 Locking and Unlocking the Front Panel
To prevent changing the settings accidentally or tampering with the unit via the front
panel buttons or the remote control transmitter, lock your VP-734. Unlocking
releases the protection mechanism. When the front panel is locked, control is still
available via RS-232 and/or the Ethernet.
To lock the VP-734, Press and hold the PANEL LOCK button on the front panel.
The front panel is locked and the PANEL LOCK button is illuminated. Pressing any
button other than the PANEL LOCK button has no effect
To unlock the VP-734, Press and hold the illuminated PANEL LOCK button on the
front panel.
The front panel unlocks and the PANEL LOCK button is no longer illuminated
The Save Lock and Input Lock functions are defined in the OSD table in
Section 7.5.3 and on the Web pages in Section 9.9.
To Next Page
Loading...
