Kramer VP-734

VP-734 - Configuring the VP-734 via the OSD MENU Screens
29
Setting
Function
Default
Blank Color
Select Black or Blue
Set the blank color (the color that appears on the screen when the
blank button is pressed)
Blue
Background
Select a Blue or Black background if no signal is detected or a file
cannot be displayed
Note that all the transitions will go through black, even if a blue
background color is selected
Black
Low Power
Saving
Select Off, Sleep or Power-down; will be activated after an input
signal is not detected for 5 minutes
When set to Sleep, press any key to reactivate the machine.
When set to Powerdown, press any key to reboot the machine
On
Save Lock
Select On or Off
Set to On to save the lock status when the machine is powered down
Input Lock
Select On or Off
Set to Off so you can still use the SOURCE buttons on the front
panel even when the lock button is on
Blank
Select Blank & Mute, Blank or Mute to determine the behavior of the
BLANK front panel button
Set to Blank & Mute to blank the output image and mute the audio
Set to Blank to blank the output
Set to Mute to mute the audio
Blank &
Mute
Freeze
Select Freeze & Mute, Freeze or Mute to determine the behavior of
the FREEZE front panel button
Set to Freeze & Mute to Freeze the output image and mute the audio
Set to Freeze to freeze the output
Set to Mute to mute the audio
Freeze
& Mute
HDCP
Setting
Select Follow Input or Follow Output to define whether the HDCP will
follow the input or the output
When Follow Input is selected, the scaler changes its HDCP output
setting (for the HDMI output) according to the HDCP of the input.
This option is recommended when the HDMI scaler output is
connected to a splitter/switcher (in this mode, switching may not be
glitch-free)
When Follow Output is selected, the scaler matches its HDCP
output to the HDCP setting of the HDMI acceptor to which it is
connected.
This ensures smooth switching, regardless of the input
Follow
Output
Over Scan
Select On or Off
Set to On to Allow stretching of the outputted picture
Off
Overlay
Select Off, Text or Logo
When selecting Text you need to download TextOvl.ini to a USB
memory stick and then connect it to the VP-734
When selecting Logo you need to download the Txtlogo.BMP file to
the USB and connect it to the VP-734
Off
Firmware
Download
Path
For factory use
Default