Kramer VP-734 - Page 39

34
VP-734 - Configuring the VP-734 via the OSD MENU Screens
7.5.6 The Input EDID Setup Screen
The following table defines the input EDID settings:
Setting
Function
Default
For HDMI 1, HDMI 2, HDMI 3, HDMI 4, DP 1
Default
Set the default EDID on the input
Default
Copy HDMI Out
Copy the EDID from the sink on the HDMI output to the
input
User Define
Select a previously stored EDID (see Read HDMI EDID in
Section 7.5.5 above)
Select Modeline
This feature is available only if Default is selected.
Otherwise it is disabled.
Select the native resolution: Default
1024x768@60, 1280x800@60, 1280x1024@60,
1366x768@60, 1440x900@60, 1400x1050@60,
1600x900@60 (R), 1600x1200@60, 1680x1050@60,
1920x1080@60, 1920x1200@60Hz (R), 720p50, 720p60,
1080p50, 1080p60, 2048x1080@50, 2048x1080@60,
3840x2160@30
3840x2160@30
For UNIV 1, UNIV 2, UNIV 3, UNIV 4
Default
Set the default EDIDs on the inputs
Default
Copy VGA Out
Copy the EDID from the sink on the PC output to the input
User Define
Select a previously stored EDID (see Read HDMI EDID in
Section 7.5.5 above)
Select Modeline
Select the native resolution: Default (1920x1080@60),
1024x768@60, 1280x800@60, 1280x1024@60,
1366x768@60, 1440x900@60, 1400x1050@60,
1600x900@60 (R), 1600x1200@60, 1680x1050@60,
1920x1080@60, 1920x1200@60Hz (R)
Default
7.5.7 The Maximum Volume Limit Screen
Set the maximum output volume from -100 to 24 (default = 24). Doing this allows
you to limit the maximum volume level that the user can set.