KRAMER: SIMPLE CREATIVE TECHNOLOGY
Contents
.
ii
7.2.4.1 Storing Setups 34
7.2.4.2 Recalling Setups 34
8 Viewing the MENU Commands Sequence 35
8.1 Locking and Unlocking the Front Panel 37
8.2 Choosing the Follow-System or Breakaway-from-System Mode 38
8.3 Setting the MACHINE ADDRESS 40
8.3.1 Changing the MACHINE ADDRESS from Standalone to a Large Matrix 40
8.3.2 Changing the MACHINE ADDRESS from a Large Matrix to Standalone 42
8.3.3 Changing the a Large Matrix Setting MACHINE ADDRESS 42
8.4 Choosing the SWITCHING METHOD Setting 44
8.4.1 Understanding the SWITCHING METHOD Settings 44
8.4.2 Configuring a SWITCHING METHOD 45
8.5 Choosing the Extended Keyboard Setting 46
8.6 Setting the STORE/RECALL KEYBOARD Mode 46
8.7 Choosing What to INDICATE 47
8.8 Choosing the COMMUNICATION Setting 48
8.9 Setting the IR REMOTE Control 48
8.10 Choosing the AUTO STORE Current SETUP 50
8.11 Identifying the MACHINE 50
8.12 Choosing the Initial RESET 51
9 Upgrading the Flash Memory 52
9.1 Connecting the PC to the RS-232 Port 52
9.2 Upgrading the Firmware 52
10 Technical Specifications 55
11 Communication Protocol 55
12 ASCII Protocol 57
12.1 Entering the ASCII Protocol 57
12.2 ASCII Command Description 57
To Next Page
Loading...
Need help?
General
