Kramer VS-88H2A

Kramer Electronics Ltd.
VS-88H2A – Using Embedded Web Pages
29
Using Embedded Web Pages
VS-88H2A can be operated remotely using the embedded Web pages. The Web pages are
accessed using a Web browser and an Ethernet connection.
Before attempting to connect:
• Perform the procedures in Operating via Ethernet on page 26.
• Ensure that your browser is supported.
The following operating systems and Web browsers are supported:
Operating Systems
Versions
Windows 7
IE
Firefox
Chrome
Safari
Windows 10
IE
Edge
Firefox
Chrome
Mac
Safari
iOS
Safari
Some features might not be supported by some mobile device operating systems.
VS-88H2A enables performing the following:
• Switching and Setting Ports on page 30.
• Changing Device Settings and Upgrading Firmware on page 38.
• Managing Web Page Security on page 40.
• Setting the Timeout on page 44.
• Setting Switching Modes on page 45.
• Setting Step-in Devices on page 47.
• Managing EDID on page 49.
• Viewing About Us Page on page 55.
To browse the VS-88H2A web pages:
1. Open your Internet browser.
2. Type the IP address of the device in the address bar of your browser. For example, the
default IP address: