Kramer VS-88H2A

Kramer Electronics Ltd.
VS-88H2A – Upgrading Firmware
56
Upgrading Firmware
Use the Kramer K-UPLOAD software to upgrade the firmware via the VS-88H2A PROG mini
USB port , via the embedded webpages (see Performing Firmware Upgrade on page 39),
or via Kramer Network.
The latest version of K-UPLOAD and installation instructions can be downloaded from our
website at: www.kramerav.com/support/product_downloads.asp.
Note that in order to use the micro-USB port, you need to install the Kramer USB driver,
available at: www.kramerav.com/support/product_downloads.asp.
16