Performing a Factory Reset
To reset the device to its factory default values:
1. In the Navigation pane, click Device Settings. The Device Settings page appears
(Figure 24).
2. Click Reset. The following window appears:
Figure 25: Device Settings Page – Factory Reset
3. Click OK to start factory reset and follow the instructions on-screen.
VS-88H2A resets to its factory default settings.
Performing Firmware Upgrade
To perform firmware upgrade:
1. In the Navigation pane, click Device Settings. The Device Settings page appears
(Figure 24).
2. Click BROWSE and select the new firmware file.
3. Click START UPGRADE and follow the instructions on-screen.
Firmware is updated.
To Next Page
Loading...
