Managing Web Page Security
Use the Authentication page to set Web access permission:
To define access to the Web pages In the Navigation pane, click Authentication. The
Password Settings page appears displaying the current status (password protected or free
access). By-default, security is set to off.
To access Web pages using the password:
1. Check the current security status.
Figure 26: Authentication Page – Security Deactivated
2. Set Activate Security to ON for Web page password protection. The following window
appears:
Figure 27: Authentication Page – Enter Password Message
3. Enter the previous password (empty, by-default).
4. Click Confirm. The following message appears:
Figure 28: Authentication Page – Security Activation Message
To Next Page
Loading...
