Advanced and User-friendly Operation
• Easy Step-In Collaboration Function – When used with a Kramer Step-In enabled
switcher, just plug in your device and press the Step-In button. Your device becomes the
active signal on the main display.
• Convenient Unit Control and Configuration Options – Local control via front panel:
switching, audio embedding, mute, test pattern, memory, EDID, front panel lock and
factory reset buttons, Input/Output LED display. Distance control using user-friendly
embedded web pages via Ethernet, Protocol 3000 API, and RS-232 serial commands
transmitted by a PC, touch screen system or other serial controller.
• Cost-Effective Maintenance – Input Selection indicators facilitate easy local maintenance
and troubleshooting. Firmware upgrade via Ethernet or mini-USB.
• Selectable switching speed.
• Audio level and balance support.
• Embedded pattern generator (480p) – With selectable patterns.
• Quick Access to Common Configurations – Save up to 16 preset configurations.
• EDID Management – Individual EDID management per input. Captures and stores the
EDID from a display device.
• Smart Switching – Active source & acceptor detection. Automatic input selection based
on priority selection or last connected input.
• ARC Support – on all inputs and outputs.
• Flexible Content Protection – Selectable HDCP per input.
• Easy front-panel operation.
• Lock button to prevent tampering.
• 5V/2A USB charger port.
• Kramer protocol 3000 support.
• Firmware upgrade via mini-USB, Ethernet or the RS-232 port, using embedded web
GUI, Kramer Network or K-Load application.
• 7-segment display, indicating the video and audio status and other functions.
• Audio breakaway and AFV (audio-follow-video) operation support.
• Efficient power-saving features.
• Includes non-volatile memory that retains the last settings, after switching the power off
and then on again.
• Input port active source detection as well as output port active sink detection.
Flexible Connectivity
• Supports up to eight analog audio inputs, eight digital audio inputs and 8 ARC inputs.
• Up to 24x24 switching for audio signals.
• 8x8 switching for HDMI signals.