Krone Comprima F 155 User Manual

Operation
130
Pos: 48.44 /Ab kürzungen /Abkürz ungen sprac hneutral/Rundb allenpressen/Co mprima V 210 XC @ 319\m od_142381769 5293_0.docx @ 2467476 @ @ 1
Comprima V 210 XC
Pos: 48.45 /BA/Be dienung /Ru ndballenpresse/Anl agebleche/A uswurfbleche in d er Heckklappe montieren_Ta belle ET-Nu mmer_Compri ma V 210 @ 51 0\mod_15016 65136159_78.d ocx @ 3496745 @ @ 1
Use the following order numbers to order the deflector sheets:
KRONE component
Order number
Deflector sheets 2x
20 067 918 *
Countersunk screw with hexagon
socket 6x
904 045 3
Pos: 48.46 /BA/Be dienung /Ru ndballenpresse/Anl ageblecheBild Anlagebleche montieren CV1 50-210 @ 137\mod_135 3510846547_78.d ocx @ 121915 3 @ @ 1
1
HDC00062
2
HDC00063
3
Fig.
100
Pos: 48.47 /BA/Be dienung /Ru ndballenpresse/Anl agebleche/Text Anlageblech e montieren alle Maschinen @ 510\mod_ 1501601365137_ 78.docx @ 3 496140 @ @ 1
If the finished round bales do not fall out of the front bale chamber, two deflector sheets (1) can
be attached to the right and left sides of the machine tailgate.
• Attach the deflector sheets (1) to the inside of the bale chamber by screwing the screws (2)
into the available boreholes.
• If, after mounting the deflector sheets (1), the finished round bales still do not fall out of the
front bale chamber, remove the right and left slide sheets (3) from the machine housing.
Pos: 48.48 /BA/Be dienung /Ru ndballenpress e/Ballen bindenB allen binden @ 35\mod_1256 126963097_7 8.docx @ 32 6486 @ 2 @ 1
11.4 Wrapping and Depositing Bales
• Start the tying and/or wrapping process (refer to chapter Operation). Continue receiving
crop until the tying or wrapping material from the crop is being moved into the bale chamber
and caught by the round bale. The nominal speed of 540 rpm must be maintained until the
tying process is complete.
• Stop the tractor and wait until the twine or net wrapping process is complete.
• Eject round bales by opening the bale chamber. Always open the tailgate completely, since
the cylinders must be completely extended to build up pressure for the floor conveyor
clamping.
• Always close the bale chamber at idle speed only and start the next baling process.
Pos: 48.49 /La yout Module /---------------Seitenumbruch---------------- @ 0\mod_11961 75311226_0.doc x @ 4165 @ @ 1

Krone Comprima F 155 Specifications

General

Brand	Krone
Model	Comprima F 155
Category	Farm Equipment
Language	English