Krone Comprima F 155 - Mounting the Hose and Cable Support; Preparing the Wrapping Material Brake

Commissioning
87
Pos: 40.53 /Übersc hriften/Überschrif ten 2/P-T/S /Schlauch- und Kabelhalter montieren @ 505\mod_149 9676481002_78.d ocx @ 347920 4 @ 2 @ 1
7.6 Mounting the hose and cable support
Pos: 40.54 /BA/Ers tinbetriebna hme/Rundballe npresse/Schlauch halter/Schlauc h- und Kabel halter monti eren_Bild_Compri ma_auch für Forti ma @ 505\ mod_1499676 270806_78.doc x @ 3479142 @ @ 1
COM00588
3
4
1
2
Fig.
59
Pos: 40.55 /BA/Ers tinbetriebna hme/Rundballe npresse/Schlauch halter/Schlauc h- und Kabel halter monti eren_Text_Co mprima Fortima @ 505\mod_149 9676365007_ 78.docx @ 3479 173 @ @ 1
• Insert the mounting and cable support (1) into the oblong holes (3) at the drawbar. Make
sure that the eye at the hose and cable support (1) points downwards.
• Attach the hose and cable support (1) with the terminals (2) from the inside and the nuts (4)
from the outside.
• The hoses and cables can be routed to the tractor through the eye at the hose and cable
holder (1).
Pos: 40.56 /Übersc hriften/Überschrif ten 2/A-E/ B/Bindematerial bremse vor bereiten @ 500\m od_14933682 97973_78.doc x @ 3438368 @ 2 @ 1
7.7 Preparing the wrapping material brake
Pos: 40.57 /BA/Ers tinbetriebna hme/Rundballe npresse/Bindemat erialbremse vorbereiten_Bild+t ext_Forti ma_Comprima @ 514\mod_15 04095875733 _78.docx @ 35347 28 @ @ 1
COM00617
1 2
Fig.
60
• Before starting up for the first time, remove the adhesive film from the brake surface (1) of
the brake disc (2).
Pos: 40.58 /La yout Module /---------------Seitenumbruch---------------- @ 0\mod_11961 75311226_0.doc x @ 4165 @ @ 1