Krone Comprima F 155 - Central Chain Lubrication System

Settings
201
Pos: 50.50 /Übersc hriften/Überschrif ten 2/U-Z/Z Zentrale K ettenschmierung @ 33\mod_125 4819776816_ 78.docx @ 319 945 @ 2 @ 1
12.15 Central chain lubrication system
Pos: 50.51 /BA/Ei nstellungen/Ru ndballenpresse/Ze ntrale Kette nschmierung @ 33\mod_1 25481991812 9_78.docx @ 3199 66 @ @ 1
1
2
3
RBV05150
Fig.
172
The central chain lubrication system is attached to the left-hand side of the machine behind the
front guard.
Each time the drive shaft makes a rotation, oil is forced out of the tank (1) via the pump (2) and
the lubrication manifolds attached to the left-hand and right-hand side of the machine, and onto
the brushes on the drive chains.
Different nozzles are built into the lubrication manifolds for each lubrication point.
The delivery rate can be adjusted by means of the eccentric cam (3) on the drive roller.
6
7
8
128 mm
VP-2-001
1
2
Fig.
173
• Loosen the screws (2).
• Rotate the eccentric cam disc (1).
• Retighten the screws (2).
Pos: 50.52 /La yout Module /---------------Seitenumbruch---------------- @ 0\mod_11961 75311226_0.doc x @ 4165 @ @ 1