Krone Comprima F 155 - Menu 5 Bale Diameter

7 Terminal menus
7.15 Menu 5 “Bale diameter”
46
RP701-10 , RP701-11 , RP701-20 , RP701-21 , RP701-30 , RP701-31 , RP701-40 , RP701-41 , RP701-51
Comfort 1.0_en
n
4
1,0
0,0
0.0
s
EQG003-004
ü For The menu level is active, refer to page36.
ü Chamber film wrapping is selected in menu 8 “Type of tying”, refer to page48.
 To open the menu, press
.
Æ The display shows menu “Tying start delay”.
Special feature of chamber film wrapping
The tying start delay is automatically set to 0.0 s for chamber film wrapping. KRONE
recommends this setting.
At high driving speeds, the tying start delay can be set to a minimum for chamber film wrapping:
 Increase or decrease the value, refer to page37.
 To save the value, press
.
7.15 Menu 5 “Bale diameter”
Comprima F155(XC)
The diameter of the round bale can be adjusted between 125and150cm.
n
5
150
125
135
cm
EQG003-019
ü For The menu level is active, refer to page36.
 To open the menu, press
.
Æ The display shows menu “Bale diameter”.