Safety
21
Pos: 14.31 /Übersc hriften/Überschrif ten 3/P-T/S Schutzvorricht ungen funktionsf ähig halten @ 187\mod_1 38002106200 4_78.docx @ 1607 105 @ 3 @ 1
3.4.11 Keeping safety devices functional
Pos: 14.32 /BA/Sic herheit/1. Grun dlegende Sich erheitshinweise /Schutzvorrichtu ngen fun ktionsfähig halten_fu er alle @ 453 \mod_14640 12282699_78.d ocx @ 3080198 @ @ 1
If safety devices are missing or damaged, people may be seriously injured or killed by moving
machine parts.
• Replace damaged safety devices.
• Remount dismounted safety devices and all other parts before start-up and move them to
protective position.
• If it is doubtful whether all safety devices have been correctly installed and are functional,
have a service centre check them.
Pos: 14.33 /Übersc hriften/Überschrif ten 3/P-T/P /Persönliche Sc hutzausrüstu ngen @ 453\ mod_14640130 64506_78.doc x @ 3080269 @ 3 @ 1
3.4.12 Personal Protective Equipment
Pos: 14.34 /BA/Sic herheit/1. Grun dlegende Sich erheitshinweise Persönliche Sc hutzausrüstung en_fuer alle @ 494\mod _1488375125538 _78.docx @ 33 22625 @ @ 1
The wearing of personal protective equipment is an important safety measure. Missing or
unsuitable personal protective equipment increases health risks and injuries.
Personal protective equipment is for example:
– Suitable protective gloves
– Safety boots
– Tight-fitting protective clothing
– Hearing protection
– Protective goggles
• Specify and provide personal protective equipment for the particular job.
• Use only personal protective equipment which is in proper condition and offers effective
protection.
• Adjust personal protective equipment to the person, for example the size.
• Remove unsuitable clothing and jewellery (e.g. rings, necklaces) and cover long hair with a
hairnet.
Pos: 14.35 /La yout Module /---------------Seitenumbruch---------------- @ 0\mod_11961 75311226_0.doc x @ 4165 @ @ 1
To Next Page
Loading...
