Safety
20
Pos: 14.29.8 /B A/Sicherheit/1. Gru ndlegende Sic herheitshinw eise/Gefahrenb ereich Zapfwell e_fuer alle @ 453 \mod_146 3993689007_ 78.docx @ 307793 3 @ @ 1
Danger zone PTO shaft
People may be caught, pulled in and seriously injured by the PTO shaft and the driven
components.
Before switching on the PTO shaft:
• Make sure that all safety devices are fitted and in the protection position.
• Ensure that there is nobody in the danger zone of PTO shaft and universal shaft.
• Switch off the drives if they are not necessary.
Pos: 14.29.9 /B A/Sicherheit/1. Gru ndlegende Sic herheitshinw eise/Gefahrenb ereich zwischen Tr aktor und Masc hine_Wender- Schwader_ RP_LW_BP _Mähwerke @ 453\ mod_146400 1877943_78.d ocx @ 307889 3 @ @ 1
Danger zone between tractor and machine
People standing between the tractor and machine may be seriously injured or killed if the tractor
rolls away or by carelessness or machine movements:
• Before working between tractor and machine: Shutdown and safeguard the machine, refer
to chapter Safety “Shutting Down and Safeguarding the Machine”. This also applies to brief
inspection work.
• If the power lifter has to be actuated, keep all people away from the range of movement of
the power lifter.
Pos: 14.29.10 / BA/Sicherheit/ 1. Grundlegende Sich erheitshin weise/Gefahren bereich bei einge schaltete m Antrieb_fuer all e @ 453\mod_ 14639953684 53_78.docx @ 3078086 @ @ 1
Danger zone when drive is switched on
When the drive is switched on, there is a danger to life caused by rotating machine parts. There
must be nobody in the danger zone of the machine.
• Before starting the machine, direct all people out of the danger zone of the machine.
• If hazardous situations arise, switch off drives immediately and instruct people to leave the
danger zone.
Pos: 14.29.11 / BA/Sicherheit/ 1. Grundlegende Sic herheitshi nweise/Gefahren bereich durch n achlaufende M aschinenteile_Einl eitung_fuer alle @ 453\ mod_1463995 805759_78.docx @ 3078178 @ @ 1
Danger zone due to coasting machine parts
When machine parts are coasting, people may be seriously injured or killed.
When the drives have been switched off, the following machine parts will coast:
Pos: 14.29.12 / BA/Sicherheit/ 1. Grundlegende Sich erheitshin weise/Gefahren bereich durch nac hlaufende Masc hinenteile_A ufz_RP Solo @ 453\mod_1 46400229020 1_78.docx @ 30 79024 @ @ 1
– Universal shaft
– Drive chains
– Pick-up
– Cutting rotor
– Tying
– Bale formation conveyor
Pos: 14.29.13 / BA/Sicherheit/ 1. Grundlegende Sich erheitshin weise/Gefahren bereich durch nac hlaufende Masc hinenteile_A bhilfe_fuer alle ausser Lade wagen und V orsätze @ 453\ mod_1463996 677614_78.docx @ 3078358 @ @ 1
• Shut down and safeguard the machine, see chapter Safety, “Shutting Down and
Safeguarding the Machine”.
• Do not approach the machine until all machine parts have come to a standstill.
Pos: 14.30 /La yout Module /---------------Seitenumbruch---------------- @ 0\mod_11961 75311226_0.doc x @ 4165 @ @ 1
To Next Page
Loading...
