Krone Comprima F 155 - Page 147

Operation
147
Pos: 48.87.10 / Abkürzungen /Ab kürzungen sprach neutral/Rund ballenpressen/C omprima F125/F 155 (XC) @ 8 0\mod_131 5900077159_ 78.docx @ 7082 31 @ @ 1
Comprima F125/F155 (XC)
Pos: 48.87.11 / BA/Bedienung /R undballenpresse/ Pressdruck ei nstellen/Bild Pres sdruc keinstellung F125/1 55 @ 81\mod _1315911207607 _78.docx @ 709262 @ @ 1
RP-0-035
2
3
0
1
1
RP-99-007
2
Fig.
118
Pos: 48.87.12 / BA/Bedienung /R undballenpresse/ Pressdruck ei nstellen/Pressdru ckvorwahl allge mein @ 321 \mod_1424 766469186_78. docx @ 24792 81 @ @ 1
Baling pressure preselection when machine is equipped with KRONE operation terminal
Alpha (medium electronics)
The baling pressure is preselected on the adjusting segment behind the front right guard. The
baling pressure is set via wing nut inside right on the twine box.
• Switch on electrical control.
• Move both baling pressure indicators (1) manually into the desired position.
• Loosen the wing nut (2) in the twine box and move screw with wing nut (2) in the oblong
hole until the warning lights on KRONE operation terminal Alpha light up and the horn is
sound.
• Tighten wing nut (2) again.
Pos: 48.88 /La yout Module /---------------Seitenumbruch---------------- @ 0\mod_11961 75311226_0.doc x @ 4165 @ @ 1