Krone Comprima F 155 - Page 241

Maintenance
241
Pos: 52.125 /Übers chriften/Zwisc henüberschrift en/P-T/Schnei dwalzenantrie b Pick-up @ 49 7\mod_149010 2166401_78.d ocx @ 3411 459 @ @ 1
Cutting unit drive of pick-up
Pos: 52.126 /BA /Wartung/Rundb allenpresse/Ket ten spannen/S pannen Ketten Sc hneidwalze nantrieb CF/CV @ 76\mod_ 13098729044 52_78.docx @ 664 701 @ @ 1
1
RPN00058
2
a
2
3
Fig.
207
The cutting roller drive pick-up (1) is located on the right-hand side of the machine.
Check the Chain Tension:
The length of the spring when tightened must be a = 200 mm.
Correct the Chain Tension:
• Turn the nut (3) to increase or reduce the spring tension of the compression spring (2) until
distance a= approx. 200 mm is set
Pos: 52.127 /Layo ut Module /---------------Seitenumbruch---------------- @ 0\mod_1196 175311226_0.d ocx @ 4165 @ @ 1