Krone Comprima F 155 - Page 63

Technical data
63
Pos: 38.5 /BA/Tec hnische Daten/Ru ndballenpress en/Compri maTechnische Dat en Compri ma F 155_RP 025 @ 507\mo d_150052826 7403_78.docx @ 3 487884 @ @ 1
Comprima F 155
(without cutting
unit)
Comprima F 155 XC
(with cutting unit)
Axle
Single axle
Single axle
Tandem axle
Pick-up (width)
2150
Track width
2150/2200/2400
Width
approx.
(depending
on the tyres)
15.0/55-17
2620
2620
2790
500/50-17
2650
2650
2900
500/55-20
–
2660
1
2800
2
–
Permissible weights
See information on the type plate
Length approx.
4700
Height approx.
3150 with standard tyres
bale size
Diameter approx.
1250–1500
Width approx.
1200
Power consumption approx.
40 kW (55 PS)
Drive speed (PTO shaft)
540 rpm
Operating pressure of the hydraulic
system
max. 200 bar
min. 150 bar
Min. oil quality
Oil ISO VG 46
Max. oil temperature
80° C
Hydraulic flow rate
max. 60 l/min
min. 30 l/min
Electrical supply
12 V (7-pin plug) for road lighting
Twine
Open air storage
Plastic twine 400–600 m/kg
Indoor storage
Sisal twine 150–300 m/kg
Net
Max. width
1300 mm
Sleeve length
1250–1330 mm
Sleeve diameter
ø 75–80 mm
Roll diameter
max. 310 mm (3000 m roll)
Film
Max. width
1280 mm
Sleeve length
1295 mm
Sleeve diameter
ø 77,3 mm
Roll diameter
225 mm (2000 m roll)
Overload
protection
(PTO
shaft)
Friction clutch
(540 rpm)
1450 Nm
–
Cam-type clutch (540
rpm)
1500 Nm
1950 Nm (17 blades)
2300 NM (26 blades)
1
– braked single axle
2
– unbraked single axle
Pos: 38.6 /Layo ut Module /---------------Seitenumbruch---------------- @ 0\mod_119617 5311226_0.docx @ 4165 @ @ 1