Maintenance – lubrication chart
100
14 Maintenance – lubrication chart
WARNING!
If the basic safety instructions are not followed, people may be seriously injured or
killed.
• To avoid accidents, the basic safety instructions in the chapter Safety must have been
read and followed, see chapter Safety "Basic safety instructions".
WARNING!
If the safety routines are not adhered to, people may be seriously injured or killed.
• To avoid accidents, the safety routines in the chapter Safety must be read and followed,
see chapter Safety "Safety routines".
Prerequisite:
• Outrigger arms are in working position, see chapter “Lowering Outrigger Arms into Working
Position”.
• Shut down and safeguard the machine, see chapter Safety -> Safety routines, "Shutting
down and safeguarding the machine".
14.1 Lubrication Points on the Universal Shafts
SW9000040
Fig. 60 Rotary drive PTO shafts Drive PTO shaft
Lubricate the PTO shafts at the intervals indicated in the figure with multi-purpose grease.
Follow the operating instructions of the PTO shaft manufacturer.
To Next Page
Loading...
