Safety
12
4.4.6 Additional equipment and spare parts
Additional equipment and spare parts, which do not comply with the requirements of the
manufacturer, may impair the operational safety of the machine and cause accidents.
• To ensure operational safety, use original or standard parts which comply with the
requirements of the manufacturer. If in doubt, have parts verified by the dealer or
manufacturer.
4.4.7 Workstations and passengers
Control of the moving machine
The moving machine requires the driver to react quickly at any time. Otherwise, the machine
may move in an uncontrolled manner and seriously injure or kill people.
• Start the engine from the driver's seat only.
• Never leave the driver's seat while the machine is moving.
• Never climb in or out of the machine while it is moving.
Passengers
Passengers may be seriously injured by the machine or fall off the machine and get run over.
Ejected objects may strike and injure passengers.
• Never let people ride on the machine.
4.4.8 Operational safety: Technically perfect condition
Operation only when the machine has been started up correctly
If the machine is not started up correctly according to these operating instructions, the
operational safety of the machine is not ensured. As a result, accidents may occur and people
may be seriously injured or killed.
• Do not use the machine unless it has been started up correctly, see chapter Start-up.
Technically perfect condition of the machine
Improper maintenance and adjustment may affect the operational safety of the machine and
cause accidents. As a result, people may be seriously injured or killed.
• Perform all maintenance and adjustment work according to the chapters Maintenance and
Adjustment.
• Before performing any maintenance or adjustment work, shut down and safeguard the
machine, see chapter Safety "Shutting down and safeguarding the machine".
To Next Page
Loading...
