Krone Swadro TC 880 - Swiveling Tine Arms to Working Position; Releasing Rotor Locking Device

Operation
65
11.3 Swivel tine arms to working position.
• Shut down and safeguard the machine, see chapter Safety -> Safety routines, "Shutting
down and safeguarding the machine".
11.4 Releasing Rotor Locking Device
SW9000029_1
1
2
3
3
1
Fig. 33
• Lower the rotor arms into working position.
• Turn off the tractor and secure it against the possibility of rolling back.
• To release the rotor locking, loosen the tension spring (1) out of the fastening clamp (2) of
the tine.
• Hinge the tension spring in the fastening hole (3).