Krone Swadro TC 880 - Deviating Torque Checks

Maintenance
93
13.6 Deviating Torque
13.6.1 Testing the Screws on the Tines
1
Fig. 55
Testing the Screws on the Tines: According to the Maintenance Table
When having released the screws,
• remove the nut.
• apply adhesive (high-strength) on the threading overhang of the screw.
• lift the tines on the tine end and tighten the nut to the torque specified below.
13.6.2 Torque of Wheels on the Running Gear
SW9000022_1
Fig. 56
Check locknut: According to the maintenance table