Krone Swadro TC 880 - Rotor Inclination with Trailing Guide Wheels

Settings
84
12.1.2 For the Version with Trailing Guide Wheels (optional)
I
I
I
SW700091_1
3
1
2
III
Fig. 51
Setting the rotor inclination:
Pos. I = Reducing rotor inclination
Pos. II = Increasing rotor inclination
Do not step under the raised rotors.
• To do this, raise the outrigger arms until the changeover work can be performed.
• To set rotor inclination, dismount the rear guide wheels and move them in the hole pattern.
Vernier adjustment by the screw on the oblong hole (3):
− = Reducing rotor inclination
+ = Increasing rotor inclination
Note
If the forage is heavy, adjust the inner running gear as low as possible!