To this Document
9
3.4 Means of representation
In this document, the following means of representation are used:
Action step
A bullet point () designates an action step you have to perform, as for example:
• Set the left outside mirror.
Sequence of actions
Several points () which are located in front of a sequence of action steps identify a sequence of
actions to be performed step by step, as for example:
• Loosen counter nut.
• Mount screw.
• Tighten counter nut.
Enumeration
Dashes (-) characterize enumerations such as, for example:
– Brakes
– Steering
– Lighting
To Next Page
Loading...
