Krone Swadro TC 880 - Rotor Inclination with Tandem Chassis

Settings
85
12.1.3 With tandem chassis version (optional)
SW9000046
I
III
II
1
2
Fig. 52
Setting the rotor inclination:
Pos. I = Reducing rotor inclination
Pos. II = Increasing rotor inclination
Do not step under the raised rotors.
• To do this, raise the outrigger arms until the changeover work can be performed.
• To set rotor inclination, dismount the rear guide wheels and move them in the hole pattern.
Vernier adjustment via plate (1):
− = Reducing rotor inclination
+ = Increasing rotor inclination
Note
When adjusting the rotor pitch, ensure the tandem axle (2) is horizontal.
Note
If the forage is heavy, adjust the inner running gear as low as possible!