Krone Swadro TC 880 - Page 55

Krone Swadro TC 880

128 pages

To Next Page

To Next Page

To Previous Page

To Previous Page

Loading...

Start-up

55

1

SW9000043_1

Fig. 24

• Install the safety chain (1) on the machine.

Table of Contents

1 Table of Contents3
2 Foreword7
3 To this Document8
- Validity8
- Identifying Symbols in the Operating Instructions8
- Information on Direction8
- Means of Representation9
4 Safety10
- Purpose of Use10
- Intended Use10
- Service Life of the Machine10
- Basic Safety Instructions10
- Safety Routines22
- Safety Stickers on the Machine26
5 Machine Description31
- Machine Overview31
- Identification Plate32
- Information Required for Questions and Orders32
  - Contact32
- Overload Protection33
6 Technical Data of the Machine34
- Technical Data34
- Consumables36
- Tyres36
- Airborne Sound Emission36
7 Control and Display Elements37
8 Commissioning40
- General40
- First Installation40
- Preparations on Tractor41
  - Adjusting the Lower Suspension Arms41
- Connecting the Lower Link42
- Height of Tractor Lower Suspension Arms42
- PTO Shaft43
  - Length Adjustment43
- Regulating Direction of Travel44
- Checking the Locking of the Transport Position45
- Checking / Setting the Distance between Tine Arm and Lifting Cylinder46
9 Start-Up47
- Preparations on Tractor48
  - Adjusting the Lower Suspension Arms48
- Connect the Machine to the Tractor49
- Connecting the Hydraulic Lines50
- Lighting Connection51
- Connecting the Operation52
- Install the PTO Shaft53
- Using the Safety Chain54
- Swivelling Parking Support into Transport Position56
10 Driving and Transport57
- Preparations for Road Travel58
- Driving on Slopes59
- Switching off the Machine60
11 Operation61
- Removing the Tine Protections from the Tine Tips61
- Lowering Outrigger Arms into Working Position62
- Swivel Tine Arms to Working Position65
- Releasing Rotor Locking Device65
  - For Design with Collapsible Tine Arm66
- Move the Hoop Guards to the Working Position66
- Setting the Working Height67
- Adjusting the Working Width69
- Move the Hoop Guards to Transport Position70
- Swivelling Tine Arms into Transport Position71
- Raising Outrigger Arms into Transport Position73
- Protecting the Tine Tips (Transport Position and Rotary Rake Switched Off)77
- Selecing Rotor Operation78
  - For Design with Hydraulic Single-Rotor Lifting Mechanism78
  - In Case of Electro-Hydraulic Single-Rotor Lifting Mechanism Design79
- Travelling Speed und Drive Speed80
- Swathing80
12 Settings82
- Setting the Rotor Inclination83
- Fixing the Trailing Guide Wheels86
- Adjustable Throttles87
13 Maintenance88
- Spare Parts88
- Special Safety Instructions89
- Test Run89
- Maintenance Table90
- Tightening Torques91
- Deviating Torque93
  - Testing the Screws on the Tines93
  - Torque of Wheels on the Running Gear93
- Tyres94
  - Checking and Maintaining Tyres94
- Replacing the Tine Arms (in Case of Repair)96
- Replacing the Tines (in Case of Repairs)98
14 Maintenance - Lubrication Chart100
- Lubrication Points on the Universal Shafts100
- Lubrication Points on the Machine102
15 Maintenance - Hydraulic System104
- Diagram105
16 Maintenance - Gearbox108
- Main Gearbox109
17 Special Equipment110
- Tine Loss Safeguard110
- Chain for Height Restriction of Suspension Arms111
18 Placing in Storage112
- Special Safety Instructions112
- At the End of the Harvest Season113
- Before the Start of the New Season114
- Special Safety Instructions114
19 Malfunctions - Causes and Remedies115
20 Disposal of the Machine117
21 Appendix118

Other manuals for Krone Swadro TC 880

Original Operating Instructions104 pages

Related product manuals

Preview: Krone Swadro TC 680

Krone Swadro TC 680

Preview: Krone Swadro TC 640

Krone Swadro TC 640

Krone Swadro TC 760

Preview: Krone Swadro TS 620

Krone Swadro TS 620

Krone Swadro TS 620 Twin

Preview: Krone Swadro 46 T

Krone Swadro 46 T

Preview: Krone Swadro 38 T

Krone Swadro 38 T

Krone Swadro 42 T

Krone Swadro 42

Preview: Krone Swadro 35

Krone Swadro 35

Preview: Krone Swadro 807

Krone Swadro 807

Krone Swadro 800/26