Printing on Shrink Tube
Kroy offers flattened shrink tube cartridges for wire marking. Insert a shrink tube
cartridge for this example.
You will start with a New file. To create a New file, press the File
key and select New with the Enter key. Or use Shift and File as a shortcut.
For our example, we kept Auto Size ON.
Type in the following text “File Server”
Press the Print key. Cut the shrink tube label and insert the wire.
The tubing can be shrunk around the wire with a heat gun.
For further information on formatting the text of your shrink tube See Chapter 3.
To Next Page
Loading...