Kroy K4100 - KLDS Software and Driver Installation

42
KLDS Software and Driver Installation
Installing the KLDS Software
Close all programs prior to installation. Insert the Kroy Label Designer into the
CD-ROM drive. On most systems the installation program will automatically
start. See the steps below to help you along with your setup.
1. The InstallShield Wizard will appear and prepare to install.
2. Kroy Label Designer Setup will appear. Click Next to continue installation.
3. The License Agreement will appear: Click Yes.
4. Choose the Destination: the default will be C:\Program\Kroy Click Next.
5. You will then choose the Setup Type. The default is Typical and is
recommended for most users. Click Next.
6. Click Finish to complete.
Installing the Printer Drivers
The drivers for the KLDS will automatically setup. You will see the following
prompts once the software portion is complete.
1. Do you wish to install Kroy Printers. Click Yes.
2. The Kroy Printer Driver Setup will then appear. Click Next to continue.
3. You can now select to add your Kroy Label Printer under Setup Type.
Click Next to continue.
4. Select the mode of printer installation. Choose Automatic and connect the
printer to your PC using the serial cable. Turn the printer on.
5. Setup will then scan the COM ports on your system for the new printer,
Click Next.
6. Name your Kroy Printer and select it as your default label printer by
selecting Yes. Click Next.
7. Recommended Port Setting will appear and click OK.
8. Click Finish to complete.