21
To print the text of your label vertically instead of horizontally using Vertical,
press the Style key. Use the left and right cursor keys to move the cursor to the
left of Vertical and press Enter. When turned on, an asterisk will appear. To
turn Vertical off press Enter again or to exit press Delete.
Vertical Example:
To rotate the text of your label using Rotate, press the Style key. Use the left
and right cursor keys to move the cursor to the left of Rotate and press Enter.
When turned on, an asterisk will appear.To turn Rotate off, press Enter again or
to exit press Delete.
Rotation and Vertical are not the same. Note: Mirror is ignored when rotation is
selected.
Rotate Example:
Auto Rotation
When a self-laminating wire wrap cartridge is installed, the K4100 will automati-
cally rotate and auto size the text using the instructions below.
You will start with a New file. To create a New file, press the File key and select
New with the Enter key. Or use Shift and File as a shortcut. This will activate
the auto rotation feature
.
To Next Page
Loading...