32
Select Auto Off to activate auto shut off. The factory default is to shut off the
printer after 5 minutes of non-use. When the printer is turned off, all current
label text and text attributes settings are saved. All files in memory are still
saved. Press Delete if you decide you do not wish to change the current set-
ting. Or press Enter to activate auto shut off. When turned on, an asterisk will
appear. By default, this function is on.
The Advance to Cut function advances the label material to the cut position.
The default setting is advance to cut enabled. If you do not need this function
you may disable the advance to cut function by using the cursor keys to move
to the left of Advance in the printer setup menu and press Enter.
The Language function allows you to choose from 4 different languages. The
default language is English. Other options are spanish, french and german.
Select Language from the printer setup menu by using the cursor keys and
press Enter. The language menu will appear. Use the cursor keys to move to
the left of the language you want and press Enter. To accept the current setting
press Delete.
Printspeed is the rate at which the label advances from the printer when print-
ed.The default printspeed is unlimited. To specify a printspeed, select PrtSpeed
from the printer setup menu by using your cursor keys and press Enter. The
printspeed menu will appear and by using your cursor keys you can select from
the options below by pressing Enter. To accept the current setting press Delete.
The LCD Contrast allows you to lighten or darken the LCD of your printer.
Select Lcdcontrast from the printer setup menu by using the cursor keys and
press Enter. The lcd contrast menu will appear. Use the right cursor to lighten
or the left cursor to darken. As you use the cursors, you will see a difference in
your screen. Press Enter to accept the your setting. To accept the current
setting press Delete.
To Next Page
Loading...