39
Select Time to add the current time to your label. Use the cursor keys to scroll
to the left of Time and press Enter. The time will be added to the label where
the cursor is positioned. The time can be formatted or deleted just as you had
physically typed it in.
Select Date to add the current date to your label. Use the cursor keys to scroll
to the left of Date and press Enter. The Date Menu will appear offering 6 for-
mats (mm/dd/yy, dd/mm/yy, mm/dd//yyyy, dd/mm/yyyy, dd.mm.yy, dd.mm.yyyy).
Use the cursor keys to scroll to the left of the format you want and press Enter.
The current date will be added to the label where the cursor is positioned. The
date can be formatted or deleted just as you had physically typed it in.
Note: Do not confuse the TIme and Date options with the Stamp option. Time
and Date enters the current time/date into your label at the insertion point, once
entered they are now considered text by the printer (as if you typed them by
hand). The Stamp function will always use the current time clock at the
time of print job.
Select Stamp to have the current date and time (at the time of print) printed
vertically on the very edge of the label. Every time you press print a stamp with
the current date and time will be printed in ddhhmmMMMyy format. Use the cur-
sor keys to scroll to the left of Stamp and press Enter. This will turn Stamp on
and an asterisk will be displayed. To turn it off, press Enter again.
Note: Using the stamp on tape supply sizes
0.50” and smaller is not recommended.
Select 24 Hour Mode causes time entered in the text of a label via the Time
option to be in 24 hour mode (i.e., 1 PM as 13). Use the cursor keys to scroll to
the left of 24 Hour Mode and press Enter. This will turn 24 Hour Mode on and
an asterisk will be displayed. To turn it off, press Enter again.
To Next Page
Loading...