To Next Page

To Previous Page

23 TECHNICAL DATA 193

Remaining screws, chassis M8 25 Nm (18.4 lbf ft) –

Screw, chain guard M8 11 Nm (8.1 lbf ft) –

Screw, engine bearer on frame M8 24 Nm (17.7 lbf ft) –

Screw, foot brake lever M8 17 Nm (12.5 lbf ft) Loctite

243™

Screw, front brake disc M8 30 Nm (22.1 lbf ft) Loctite

243™

Screw, front wheel spindle M8 26 Nm (19.2 lbf ft) –

Screw, fuel tank attachment, rear, on

frame

M8 16 Nm (11.8 lbf ft) –

Screw, horn M8 7 Nm (5.2 lbf ft) –

Screw, main silencer M8 24 Nm (17.7 lbf ft) –

Screw, passenger footrest bracket M8 26 Nm (19.2 lbf ft) Loctite

243™

Screw, rear brake disc M8 30 Nm (22.1 lbf ft) Loctite

243™

Screw, shift lever M8 17 Nm (12.5 lbf ft) Loctite

243™

Screw, top triple clamp M8 15 Nm (11.1 lbf ft) –

Screw, front brake caliper M8x1 30 Nm (22.1 lbf ft) Loctite

204™

Banjo bolt, brake line M10 24 Nm (17.7 lbf ft) –

Remaining nuts, chassis M10 45 Nm (33.2 lbf ft) –

Remaining screws, chassis M10 45 Nm (33.2 lbf ft) –

Fitting, shock absorber, bottom M10x1.25 50 Nm (36.9 lbf ft) –

Nut, rear sprocket screw M10x1.25 27 Nm (19.9 lbf ft) Loctite

243™

Screw, front footrest bracket / engine

bearer

M10x1.25 47 Nm (34.7 lbf ft) –

Screw, side stand bracket M10x1.25 33 Nm (24.3 lbf ft) Loctite

243™

Stud, rear sprocket M10x1.25 50 Nm (36.9 lbf ft) –

Nut, rear wheel spindle M14x1.5 90 Nm (66.4 lbf ft) –

Questions and Answers:

Need help?

Do you have a question about the KTM RC 200 and is the answer not in the manual?

KTM RC 200 Specifications

General

Displacement	199.5 cc
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Rear Suspension	WP APEX Monoshock
Bore x Stroke	72 mm x 49 mm
Compression Ratio	11.5:1
Max Power	25 PS @ 10000 rpm
Max Torque	19.2 Nm @ 8000 rpm
Front Brake	300 mm disc
Rear Brake	230 mm disc
Fuel Tank Capacity	13.7 liters
Kerb Weight	160 kg
Front Suspension	WP APEX 43 mm Upside Down
ABS	Dual Channel
Tyre Front	110/70-17
Tyre Rear	150/60-R17
Ground Clearance	157 mm
Engine Type	Single Cylinder, Liquid Cooled