FC302G - FC302GI - FC352G
90
10. - Maintenance and storage
KN270BGB_F
Mower conditioner
Knife replacement
See section: ’’Disc replacement’’.
- Replace nuts in the following cases (1):
• When the nut wear reaches a = 5 mm (0.2’’).
a
Check the condition of the securing elements
regularly and also the torque of the knife-fixing
bolt:
• Torque: 12 daNm (89 lbf ft).
Before carrying out any maintenance or
repairs on the machine, switch off the tractor
engine, remove ignition key, wait until all
moving parts have come to a standstill and
apply park brake.
Replace immediately all worn or distorted
knives.
- Never straighten a bent knife.
- Always replace both knives per disc.
To Next Page
Loading...
