62 / 125 Issued: 16.03.2016 Version: MA KR 300 470-2 PA V5
KR 300-2 PA, KR 470-2 PA
Transportation The robot can be transported by fork lift truck or using lifting tackle.
Transportation by
fork lift truck
For transport by fork lift truck (>>> Fig. 7-3 ), two fork slots are provided in the
base frame. The robot can be picked up by the fork lift truck from the front and
rear. The fork lift truck must have a minimum payload capacity of 3.5 t.
Fig. 7-2: Transport dimensions
1 Robot
2 Center of gravity
3 Fork slots
Use of unsuitable handling equipment may result in dam-
age to the robot or injury to persons. Only use authorized
handling equipment with a sufficient load-bearing capacity. Only transport
the robot in the manner specified here.
Avoid excessive loading of the fork slots through undue inward or out-
ward movement of hydraulically adjustable forks of the fork lift truck.
To Next Page
Loading...
