Kurzweil Forte 7 - Saving a Split

Multi Mode
The Layer Function
8-11
Saving a Split
After setting the Split parameters, press the Save button to the left of the display to begin the
saving process. See “Save User Multis” for details on saving. A Multi name is automatically
created using half of the Zone 1 Program name and half of the Zone 2 Program name. is
name can be edited during the saving process.
Once you have saved your Split, you can continue to add Split or Layer Zones to the Multi
until you reach the maximum of four active Zones. Also, once you have saved your Split,
you can use Multi Edit Mode to edit controller assignments (like eects controls and sustain
pedal per Zone), transposition per Zone, and other Multi parameters. (See “Multi Edit
Mode” on page 9-1 for details.)