Kurzweil Forte 7 - MAIN Page Parameters for Zones

Multi Edit Mode
MAIN Page
9-8
MAIN Page
e Main Page shows the current settings that are specic for the currently selected Zone.
e top right hand corner of the display indicates the currently selected Zone of a total of 4
Zones.
Parameter Range Of Values Default Value
Transpose -128 to +127 ST (semitones) 0 ST
Notemap
Off, Linear, 1 of 2, 2 of 2, 1 of 3, 2 of
3, 3 of 3, 1 of 4, 2 of 4, 3 of 4, 4 of 4,
Inverse, Constant,
Linear
Destination
NONE, LOCAL, MIDI, MIDI+LOCAL,
USB, USB+LOCAL, USB+MIDI,
USB+LOCAL+MIDI
USB+LOCAL+MIDI
Out
Auto, A, B
Auto
Channel 1 to 16 1
BankMode None, Ctl 0, Ctl 32, Ctl 0/32, K2600 Ctl 0/32
MidiBank None, 0 to 16383 -
MidiProg (Depends on BankMode) -
EntryPrgChg On, Off On
Bend Up ST Prog, 0 to 127 ST (semitones) 2 ST
Bend Down ST Prog, 0 to 127 ST (semitones) 2 ST
VelMode Traditional, Fixed Traditional
Velocity 0 - 127 (when VelMode = Fixed) 127
VelScale -300 to +300 % 100 %
VelOffset -128 to 127 0
VelCurve
Linear, Compress, Expand, Cross-
fade, Bump, Rvrs Linear, Rvrs
Expand, Rvrs Compress, Rvrs
Crossfade
Linear
LoVel 1 to 127 1
HiVel 1 to 127 127
Bend Up CT Prog, 0 to 100 ct (cents) 0 ct
Bend Down CT Prog, 0 to 100 ct (cents) 0 ct