Kurzweil Forte 7 - Saving a Layer

Multi Mode
The Layer Function
8-14
Saving a Layer
After setting the Layer parameters, press the Save button to the left of the display to begin
the saving process. A Multi name is automatically created using half of the Zone 1 Program
name and half of the Zone 2 Program name. is name can be edited during the saving
process. See “Save and Delete User Multis” on page 9-30 for details on saving.
Once you have saved your Layer, you can continue to add Split or Layer Zones to the Multi
until you reach the maximum of four active Zones. Also, once you have saved your Layer,
you can use Multi Edit Mode to edit controller assignments (like eects controls and sustain
pedal per Zone), transposition per Zone, and other Multi parameters. (See Multi Edit Mode
on page 9-1 for details.)