Global Mode
10-2
When you enter Global Mode, the last selected parameter since power-up (or the Tune
parameter if you’re entering Global Mode for the rst time since power-up) will be the
currently selected parameter.
Selecting and Editing Parameters
To scroll through the parameters of Global Mode, use the Up/Down Arrow buttons.
First, using the buttons underneath the display, select the page you need.
To edit the currently selected parameter, use the Alpha Wheel or the Previous and Next
buttons. Pressing both Previous & Next buttons simultaneously (called Value Jump) will
jump to a dierent value depending on the parameter selected. e jump value is mentioned
in each of the parameter descriptions below.
To Next Page
Loading...
Need help?
General
