Kurzweil Forte 7 - COMMON Page Parameters Explained

Program Edit Mode
Program Pages
7-10
With respect to each other, the Aux 1 and Aux 2 are always in parallel, that is, the
output of one Aux Chain can not be processed by the other Aux Chain.
COMMON Page
e Common Page allows adjustment of a number of general parameters for the program.
Parameter
Range Of Values
Default Value
BendRange Up
-7200 cents to +7200 cents
200 ct
BendRange Down
-7200 cents to +7200 cents
-200 ct
Output Gain
-96 to 24dB
0dB
Category
None, 20 Categories
None
Intonation Map 0-127 None (0)
Intonation Key C - B C
Monophonic Off, On Off
Legato Off, On On
Portamento Off, On On
Portamento Rate 1-3000 Key/s 70 Key/s
Mono Sample XFade Off, On On
BendRange Up & BendRange Down
Use these parameters to dene how much the pitch will change when you move the Pitch
Wheel. You can set either Bend parameter to bend by up to 72 half-steps up or down. Pitch
values are set in cents, where 100 cents = 1 half-step (1 semitone).