Kurzweil Forte 7 - FX Page: Applying Audio Effects to Programs

Program Edit Mode
Program Pages
7-7
For all parameters with a Value of None, any values set with a physical control
will not be saved when saving the program. You must set the Value column for
that parameter to something other than None in order to set and save a value.
ese values will remain set until changed with a controller, or until a program is
loaded on the current MIDI channel that does not have a value of None for these
parameters.
FX Page
Press the FX soft button to call up the FX page (Eects page). Use this page to apply audio
eects to a program. You can choose an eects chain for insert eects and an eects chain for
auxiliary eects 1 and 2.
e Forte’s chains contain a variety of eects. Each chain displays icons representing the
type of eects contained in the chain, as well as the order of eects in the chain (signal ows
from left to right). e Forte’s chains include dierent types of reverb, chorus, delay, anger,
phaser, tremolo, panner, leslie, distortion, EQ, compression, lter, envelope following lter,
frequency stimulator, ring modulator, frequency oset, pitch LFO, and stereoizer.
Parameter Range Of Values Default Value
Insert Effect list (See Appendix F) 0 None
Aux 1 Effect list (See Appendix F) 0 None
Aux 1 Send 0 to 100% 0%
Aux 2 Effect list (See Appendix F) 0 None
Aux 2 Send 0 to 100% 0%
Aux 2 Send (Piano Programs) Off, -95dB to 24dB Off
Output
A, B A
Pre/Post Ins Post, Pre Pre