Kurzweil Forte 7 - KB3 Channel; About Auxiliary Effects; Save and Delete User Multis

Multi Edit Mode
About Auxiliary Effects
9-30
KB3 Channel
If KB3 Programs are selected for more than one Zone, this parameter species which MIDI
Channel has priority to load a KB3 Program. Only one KB3 Program can be loaded at a
time. You can set this parameter to a value between 1 and 16. If you want a KB3 Program to
play in a zone, you should set the KB3 channel to the channel of the Zone.
About Auxiliary Effects
Programs and Multis both have an auxiliary eect send. An auxiliary eect is an eect that is
not in the direct path of the sound, but rather, it “receives” and processes the sound applying
the eect, which is mixed back with the original sound. e following diagram illustrates
the signal path of a sound through the auxiliary eect: On the Forte, the auxiliary eects are
global to all channels and Zones, Programs and Multi’s. One eect chain can be loaded into
each of Aux1 and Aux2, and these are used for any Program or Multi that has active Aux
Sends.
e AUX1 and AUX2 parameters (on the FX page) determines the level the auxiliary eect
will process the sound for that Zone.
Save and Delete User Multis
For details on saving user Multis, see Saving a User Multi on page 8-18 of the Multi Mode
chapter.
For details on deleting user Multis, see DELETE Page on page 10-21.