Program Mode
Selecting Programs
6-8
By having the Keypad button on, you can manually type in the Program ID number
followed by the Enter number and the Forte will go to that Program if it exists. If a Program
does not exist, the ID will be displayed along with “Not found!”. When the Keypad button
and the User button are enabled, User programs are ordered by ID number instead of by
category when scrolling through the Program list.
Choosing Category Default Programs
You can choose a “Category default program” from each Category that will be recalled each
time you press that Category’s button. To save a Category default program, rst select a
Program using any Program select method (Alpha wheel, Previous/Next buttons, Category
buttons). A Category button for the current Category will have a lit LED. Next, press and
hold the currently lit Category button until the display shows the message “Category default
program saved.” e Category default program has now been successfully saved.
To Next Page
Loading...
